Functions of MortScript

1. Function to rename a directory/folder: just use Rename(oldDirName,newDirName,True) Although in the 4.1 manual it says Rename is for a file, it works for directories too.
2. Function to enlarge the font size of Choice/ChoiceDefault: I use SetChoiceEntryFormat(45,36) when there are less than or equal to three choices to display on my 480x272 screen.
   

Sanyo NVM-4050 GPS

1. Keep PNAShell.exe running for the Menu/Power button to work
2. Kill MainPanel.exe before running Media player
It can be wrapped in a MortScript to launch media player by the following command

CallScript("MplayerLauncher.mscr", "\myflashdisk\programs\mediaplayer", "Player.exe")

The content of the MplayerLauncher.mscr is shown below:

ErrorLevel("warn")

CWD = SystemPath("ScriptPath")

appFolder = argv[1]
appEXE = argv[2]

If(FileExists(appFolder\appEXE))

If(ProcExists("MainPanel.exe"))
MainPanelRunning = "true"
Kill("MainPanel.exe")
EndIf

RunWait(appFolder\appEXE)

If(MainPanelRunning eq "true")
Run("\ShellDisk\Shell\Communication\MainPanel.exe")
Waitfor("MainPanel", 3)
EndIf

Else
BigMessage(appFolder\appEXE&" was not found. Install the application to that path and try again.","Application not found")
EndIf

3. Native support by GAPI can be achieved by selecting the Acer P615 device for both 16 and 32 bit (thanks to Robert) . Otherwise use emulator (GAPI to GDI wrapper).
4. When a corrupted folder is detected in myflashdisk by the windows CE, open error checking from XP to check the flash drive
5. CPU ARM920T S3C2443 (thanks to Checko), Windows CE 5.0 core, 480x272 screen
   
6. Bootloader's menu (unbrick a bricked GPS)
• Download the driver package from here
• Hold down the Menu button while powering it on or hard reset
• Connect the unit to PC via USB
• Install the driver secbulk.inf for SEC SOC USB Bulk IO Test Board Secbulk from the USB driver folder 
• Run the USB/Serial Downloader DNW5.0e.exe 
• Make a test of USB connection by clicking the” USB port/Status”. If all is ok go to next step
• Click “USB port/Transmit” and select the file “MioP550 - Osc260A R05_P09.nb0” repair the WinCE (not working yet)
• Press the reset button to reboot.